StoppingPower.net Forums
Home
Forums
Commentary
H&S
About
StoppingPower.net Forums

StoppingPower.net Forums - KelTec Sub2000 recall
StoppingPower.net Forums
StoppingPower.net Forums
Forums Home | Profile | Register | Active Topics | Members | Search | FAQ | Invite a friend
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Shooting
 The Rifle Rack
 KelTec Sub2000 recall
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

LittleBill
Advanced Member

4957 Posts

Posted - June 06 2018 :  4:02:37 PM  Show Profile  Reply with Quote
This from KelTec:

”IMPORTANT SUB-2000 SAFETY RECALL NOTICE

We have recently identified an issue with the heat treatment of certain steel tubes received from a third-party supplier from which the barrels for a limited number of Kel-Tec SUB-2000 rifles were manufactured. This could potentially cause the barrel to rupture when a cartridge is fired and could result in serious personal injury. The safety of our customers is our primary concern, so Kel-Tec has voluntarily initiated this recall because of the possibility of a barrel rupturing.

This recall only affects a portion of SUB-2000s that were manufactured in 2017.

To check if your firearm would need to be sent in for barrel replacement enter your serial number into the provided field below. Refer to the image at the bottom of this page to help locate your serial number. In addition, if you would like to view a list of all affected serial numbers, Click Here. [link disabled]

All costs associated with the recall of your firearm shall be covered by Kel-Tec.”



"Courage is not simply one of the virtues, but the form of every virtue at its testing point"--- C.S. Lewis

"There are some ideas so foolish, that only an intellectual could believe them"--- George Orwell

Slow Is Smooth, Smooth Is Fast
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
StoppingPower.net Forums © 2002-16 StoppingPower.net, Inc. Go To Top Of Page
Thispagewasgeneratedin0.04seconds. Snitz Forums 2000