| Author |
 Topic  |
|
|
mojo
Advanced Member
USA
1520 Posts |
 Posted - August 16 2009 : 6:03:53 PM
|
Do any of you 1911 guys know where I can get a fixed replacement sight for a Bo-Mar cut? I would like to replace the adjustable sight on my STI Spartan with a fixed one but can't find what I want when I do a google search. The only thing I found is at Brownell's it is a two piece affair that looks like trouble to me. The gun has an LPA brand sight on it now if that makes any difference.
Thanks,
MoJo |
"In these modern times, many men are wounded for not having weapons or knowledge of their use."
-Achille Marozzo, 1536
"I ask, sir, what is the militia? It is the whole people, except for a few public officials.
To disarm the people is the best and most effectual way to enslave them."
-George Mason |
|
|
Jim Higginbotham
Moderator
USA
6232 Posts |
Posted - August 16 2009 : 7:13:05 PM
|
I would be greatly surprised if Heinie did not make one, though I have not used it myself.
I have seen a replacment for the Kimber Eclipse which is almost a Bomar but that sight is slightly different I think.
Be sure you know which Bomar. BMCS is the most common but there are others.
Jim |
 |
|
|
Gary1911A1
Starting Member
USA
34 Posts |
Posted - August 16 2009 : 7:19:25 PM
|
This might work for you: ALL LINKS MUST BE APPROVED-EVAN
Sorry, I guess this was the design you were talking about in your post. |
Edited by - Gary1911A1 on August 17 2009 08:38:55 AM |
|
|
|
mojo
Advanced Member
USA
1520 Posts |
Posted - August 17 2009 : 09:04:15 AM
|
Jim, I e-mailed Heinie got a reply within a couple of hours - - - they don't make a sight like I'm looking for. 
Gary1911A1, Yes, that is the one I mentioned. I did a search for "LPA" and found this one:
I'll be sending Brownell's an order for one. |
"In these modern times, many men are wounded for not having weapons or knowledge of their use."
-Achille Marozzo, 1536
"I ask, sir, what is the militia? It is the whole people, except for a few public officials.
To disarm the people is the best and most effectual way to enslave them."
-George Mason |
Edited by - mojo on August 20 2009 9:01:02 PM |
|
|
|
TheQuietMan
Starting Member
USA
40 Posts |
Posted - August 20 2009 : 7:09:17 PM
|
Harrison makes one.
I have since replaced my Bomars after an elevation screw on my match pistol sheared off during the NC Sectionals.
Brownells' carries them. # 100-003-572DE
|
|
|
|
deercop
Starting Member
11 Posts |
Posted - August 21 2009 : 11:17:01 PM
|
| I've got one of the ones that Brownells carries, made by Harrison Design & Consulting, on my Colt Special Combat Government. It is a two piece design, but incredibly solid. |
Certified GLOCK Armorer
NRA Life Member |
|
|
|
mojo
Advanced Member
USA
1520 Posts |
Posted - August 21 2009 : 11:57:00 PM
|
| My Spartan has an LPA clone of the BoMar on it. Harrison makes a fixed replacement for the LPA cut. I'm going to get one on order. Thanks for the suggestions. |
"In these modern times, many men are wounded for not having weapons or knowledge of their use."
-Achille Marozzo, 1536
"I ask, sir, what is the militia? It is the whole people, except for a few public officials.
To disarm the people is the best and most effectual way to enslave them."
-George Mason |
|
|
|
PMedic605
Starting Member
USA
4 Posts |
Posted - December 06 2009 : 4:35:01 PM
|
| XS Sights has a fixed rear for a Bomar cut, but it also uses the XS front. Some people like Big Dots and others do not. |
|
|
| |
Topic |
|
Fixed sight replacement for Bo-Mar
