Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - June 14 2018 : 10:56:30 AM Hi, I was at the range yesterday and a shooter was attempting to adjust his MN front sight. The standard AK/SKS elevation tool did not fit the small hole in the top of the front sight hood. So what's up is it adjustable? Is there a special tool? Regards, Mike
2 L A T E S T R E P L I E S (Newest First)
Posted - June 14 2018 : 10:57:06 PM Hi revjen45, thanks for the info I'll pass on the info, regards, Mike
Posted - June 14 2018 : 10:46:23 PM The ft sight on the M-N is not adjustable for elevation. Smith Sights makes one that is. Or one can slip a piece of heat shrink tubing for #12 (IIRC) over the post, cut it and shrink. Or the post can be driven out (after removal), the hole drilled out, and a set screw drilled and tapped.